Home

HYGROSMART®-IMPER-C-2K-FLEX

HYGROSMART®-IMPER-C-2K-FLEX

HYGROSMART® -IMPER-C-2K-FLEX is a two-component waterproofing mortar based on cementitious binders, synthetic & inorganic polymers and high technology additives in water dispersion. It is a low viscosity mixture with excellent workability, easy application and very strong adhesion. On vertical substrates, one can apply a layer of thickness up to 2 mm in one coat. It remains flexible and also displays outstanding mechanical properties.
Waterproofing and protection of
Wet rooms, roofs & balconies, swimming pools (under tiles)
Water tanks
Concrete structures
Pre-cast panels
Underground structures
Retaining walls

TYPICAL SPECIFICATIONS

HYGROSMART® -IMPER-C-2K-FLEX shall be applied over the concrete surface. The cured membrane shall have adhesion to concrete >2 MPa and highly resistant to positive and negative pressures.

SURFACE PREPARATION

All waterproofing treatment performances are based on the soundness and suitability of the surface. The surface shall be cleaned from all loose materials, oil, laitance and any other construction debris. The surface shall be free from spalling and unevenness, if in case the surface is very uneven, then it shall be resurfaced using polymer modified repair mortars

PRIMER

The substrate shall be simply dampened with water.

TREATMENT OF SURFACE IRREGULARITIES

Surface irregularities can be filled with EPOXY RESIN-21-T or HYGROSMART® -BUILDING-F.

APPLICATION OF WATERPROOFING MEMBRANE

HYGROSMART® -IMPER-C-2K-FLEX shall be mixed well and applied in minimum two coats by using trowel, brush or roller. It remains flexible even when subjected to variable weather conditions and mechanical stresses.

Please contact ALCHIMICA TECHNICAL SERVICES for;

  • Detailed specifications with respect to individual project and application conditions.
  • Required consumption or coverage details along with application methods.