Toll free No.

Top Coats

HYPERCRETE ® -A510

HYPERDESMO® -A510 is a one component, low solvent content, aliphatic polyurethane liquid membrane which cures with the humidity in the atmosphere. It produces a non-yellowing, elastic strong film with excellent adhesion to different surfaces. Due to its aliphatic backbone, HYPERDESMO®-A510 does not require additional color protection with a topcoat. It is, in any color, including dark colors, completely UV resistant!

It is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

PU-FINISH MATTE

PU-FINISH MATTE is a one-component, low viscosity polyurethane fluid which cures with the humidity in the atmosphere to produce a transparent membrane with very strong adhesion on most types of substrate. It is aliphatic: No yellowing as a result of direct exposure to sunlight.

HYPERDESMO® -ADY

HYPERDESMO® -ADY is a one-component polyurethane fluid which cures with the humidity in the atmosphere to produce a transparent membrane with uniform adhesion over the entire surface. It is aliphatic: No yellowing as a result of direct exposure to sunlight.

It is based on pure elastomeric hydrophobic polyurethane resin, which results in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with brush, roller or airless spraying in one or two coats. Minimum consumption per coat: 0.1 kg/m2.

For waterproofing and protection in the following cases:

  • Industrial floors,
  • building materials like stone, marble, bricks and wood,
  • metals like iron, steel and aluminium,
  • door and window casings,
  • wooden floors,
  • furniture.

HYPERDESMO® -ADY-E

HYPERDESMO® -ADY-E is a one-component polyurethane fluid which cures with the humidity in the atmosphere to produce a transparent membrane, of increased elasticity, with uniform adhesion over the entire surface. It is aliphatic: No yellowing as a result of direct exposure to sunlight. It is ideal for colour protection of HYPERDESMO® products.

It is based on pure elastomeric hydrophobic polyurethane resin, which results in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with brush, roller or airless spraying in one or two coats. Minimum consumption per coat: 0.1 kg/m2.

RECOMMENDED FOR:

  • Top-coating (pigmented) HYPERDESMO® and HYPERDESMO® -LV,
  • top-coating flooring applications (pigmented),
  • protecting concrete or synthetic coats.

HYPERDESMO® -ADY-2K

HYPERDESMO® -ADY-2K is a two-component, 100% solids, fully aliphatic polyurethane top-coat / paint, which, once cured, produces a tough membrane with, specifically, high resistance to abrasion and chemicals.
It contains high quality inorganic fillers and pigments, which result in excellent hiding power in one coat only and, hence, significantly reduced consumption and application time. Further, it is thixotopic, which also makes it highly suitable for application on vertical substrates in, again, just one coat. Last but not least, due to its 100% aliphatic backbone, there is no yellowing as a result of direct exposure to sunlight.

Apply with roller or rubber squeegee in one or two coats. Maximum total consumption: 0.5 kg/m2.

Use as protective & UV resistant top-coat on:

  • Polyurethane flooring systems (HYPERFLOORTM System),
  • hot cure, spray applied polyurea (HYPERDESMO®-POLYUREA-2K-HC).

Also, for use as a UV resistant polyurethane paint for floors and swimming pools.

HYPERDESMO® -A500

HYPERDESMO® -A500 is a fully aliphatic, one component, polyurethane fluid. Upon curing it produces a tough but highly elastic non-yellowing membrane. It contains pigments and special inorganic fillers which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Ιt is used as a top-coat to the HYPERDESMO® System, offering increased UV resistance and colour protection.

HYPERDESMO®-A500 does NOT yellow or wear out when exposed directly to sunlight (it is aliphatic) even in dark colours, e.g. red.

Apply by brush, roller or airless spraying. Consumption: 0.2-0.5 kg/m2.

Use for top-coating the HYPERDESMO® SYSTEM (colour protection), and HYPERDESMO®-100 and HYPERDESMO®-750 (membrane protection).

HYPERDESMO® -T

HYPERDESMO®-T is a one component high solids, polyurethane fluid, which cures with the humidity in the atmosphere. It produces an elastic, highly durable, highly hydrophobic membrane with excellent UV resistance. Being aliphatic, it does not yellow/discolour when exposed to sunlight.

It is based on pure elastomeric, hydrophobic, aliphatic polyurethane resin, which results in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Apply with roller in one or two coats. Minimum total consumption: 0.2-1.0 kg/m2.

Warning: Although HYPERDESMO®-T looks coloured, especially when it is in large containers, it is stressed that the end result is, indeed, transparent.

For waterproofing and protection of:

  • Tiles,
  • natural stone,
  • wood,
  • verandas and balconies,
  • terraces.

EPOXY RESIN-51-POOL

EPOXY RESIN-51-POOL is a two component, thixotropic, solvent-free, epoxy paint formulated to maximize pot-life and adhesion without the use of solvents or diluents. It has with excellent chemical resistance, high impact and abrasion resistance.