Toll free No.

Other Products

MOLDING-PUR-40

MOLDING-PUR-40 is a two component, 1/1 mixing ratio, low viscosity cold cast polyurethane elastomer. The low viscosity and the fact that the material is 100% pure resin allows superior handling and excellent imprinting even of the finest detail.

MOLDING-PUR-40, combines a good pot-life with very fast de-molding times and produces a flexible but durable elastomer. The material is 100% solids and therefore molds will not shrink or soften with age.

Recommended for:

  • Stamp Concrete
  • Art molds
  • Molds from plaster, epoxy, wax sculptures.

MOLDING-PUR-80

MOLDING-PUR-80 is a two component, 1/1 mixing ratio, low viscosity cold cast polyurethane elastomer. The low viscosity and the fact that the material is 100% pure resin allows superior handling and excellent imprinting even of the finest detail.

MOLDING-PUR-80, combines a good pot-life with very fast de-molding times and produces a flexible but durable elastomer. The material is 100% solids and therefore molds will not shrink or soften with age.

  • Stamp Concrete
  • Art molds
  • Molds from plaster, epoxy, wax
  • sculptures.